Standardization and processing shed refers to the facilities or areas where standardization and processing activities are carried out. This shed is a centralized place for various industries such as agriculture, manufacturing and food processing to streamline its operations and ensure consistent quality.

Standardization and processing shed refers to the facilities or areas where standardization and processing activities are carried out. This shed is a centralized place for various industries such as agriculture, manufacturing and food processing to streamline its operations and ensure consistent quality.

Galvanized double joist is a steel component commonly used in building structures. It consists of two parallel beams, which are connected to each other by steel rods or steel plates. This kind of component has the advantages of strong bearing capacity, good rigidity and corrosion resistance, and is widely used in factories, bridges, underground water conservancy projects and other fields.

It consists of two inner and outer sleeves. The inner tube is made of +48mm welded steel pipe (wall thickness is between 2.5-3.0mm). The inner tube is provided with a pin hole at intervals of 100mm, which can be inserted into a return steel pin. The middle 60mm steel pipe (wall thickness is between 2.5-3.0mm) is welded on the outer tube. It is made of seamless steel pipe and is matched with micro-nut with a fine adjustment range of 1-100mm. The adjustable height range of independent support is 1.9m -- 4.5m.

It consists of two inner and outer sleeves. The inner tube is made of +48mm welded steel pipe (wall thickness is between 2.5-3.0mm). The inner tube is provided with a pin hole at intervals of 100mm, which can be inserted into a return steel pin. The middle 60mm steel pipe (wall thickness is between 2.5-3.0mm) is welded on the outer tube. It is made of seamless steel pipe and is matched with micro-nut with a fine adjustment range of 1-100mm. The adjustable height range of independent support is 1.9m -- 4.5m.

It consists of two inner and outer sleeves. The inner tube is made of +48mm welded steel pipe (wall thickness is between 2.5-3.0mm). The inner tube is provided with a pin hole at intervals of 100mm, which can be inserted into a return steel pin. The middle 60mm steel pipe (wall thickness is between 2.5-3.0mm) is welded on the outer tube. It is made of seamless steel pipe and is matched with micro-nut with a fine adjustment range of 1-100mm. The adjustable height range of independent support is 1.9m -- 4.5m.